GetPreference {Steel AISC LRFD93}

GetPreference

Syntax

SapObject.SapModel.DesignSteel.AISC_LRFD93.GetPreference

VB6 Procedure

Function GetPreference(ByVal Item As Long, ByRef Value As Double) As Long

Parameters

Item

This is an integer between 1 and 15, inclusive, indicating the preference item considered.

1 = Framing type

2 = Phi bending

3 = Phi compression

4 = Phi tension

5 = Phi shear

6 = Phi compression, angle

7 = Consider deflection

8 = DL deflection limit, L/Value

9 = SDL + LL deflection limit, L/Value

10 = LL deflection limit, L/Value

11 = Total deflection limit, L/Value

12 = Total camber limit, L/Value

13 = Pattern live load factor

14 = Demand/capacity ratio limit

15 = Multi-response case design

Value

The value of the considered preference item.

1 = Framing type

1 = Moment Frame

2 = Braced Frame

2 = Phi bending

Value > 0

3 = Phi compression

Value > 0

4 = Phi tension

Value > 0

5 = Phi shear

Value > 0

6 = Phi compression, angle

Value > 0

7 = Consider deflection

0 = No

Any other value = Yes

8 = DL deflection limit, L/Value

Value > 0

9 = SDL + LL deflection limit, L/Value

Value > 0

10 = LL deflection limit, L/Value

Value > 0

11 = Total deflection limit, L/Value

Value > 0

12 = Total camber limit, L/Value

Value > 0

13 = Pattern live load factor

Value >= 0

14 = Demand/capacity ratio limit

Value > 0

15 = Multi-response case design

1 = Envelopes

2 = Step-by-step

3 = Last step

4 = Envelopes -- All

5 = Step-by-step -- All

Remarks

This function retrieves the value of a steel design preference item.

The function returns zero if the item is successfully retrieved; otherwise it returns a nonzero value.

VBA Example

Sub GetSteelDesignPreferenceItemAISC_LRFD93()

'dimension variables

Dim SapObject as cOAPI

Dim SapModel As cSapModel

Dim ret As Long

Dim Value As Double

'create Sap2000 object

Set SapObject = CreateObject("CSI.SAP2000.API.SapObject")

'start Sap2000 application

SapObject.ApplicationStart

'create SapModel object

Set SapModel = SapObject.SapModel

'initialize model

ret = SapModel.InitializeNewModel

'create model from template

ret = SapModel.File.New2DFrame(PortalFrame, 2, 144, 2, 288)

'set steel design code

ret = SapModel.DesignSteel.SetCode("AISC-LRFD93")

'get preference item

ret = SapModel.DesignSteel.AISC_LRFD93.GetPreference(1, Value)

'close Sap2000

SapObject.ApplicationExit False

Set SapModel = Nothing

Set SapObject = Nothing

End Sub

Release Notes

Initial release in version 11.03.

Changed Time history design item to Multi-response case design and added additional values in version 15.0.1.

See Also

SetPreference